Hubsan X4 Quadcopter with FPV Camera Toy

Hubsan X4 Quadcopter with FPV Camera Toy

Hubsan X4 Quadcopter with FPV Camera Toy

  • Control distance: 50 – 100meters, Live video distance: around 100 meters
  • Latest 6-axis flight control system with adjustable gyro sensitivity
  • Lightweight airframe with nice durability
  • Instant video preview on transmitter
  • Battery: 3.7V Voltage, 380mAh li-po battery with auto cut off safety PCB
  • 6 Axis Gyro Stabilization
  • Immersive FPV Flight
  • Record Flight Video to SD Card
  • 1S 380mAh 3.7V LiPO battery is included, the 4 AA batteries is sold separately

Lightweight airframe with nice durability Latest 6-axis flight control system with adjustable gyro sensitivity Permits super stable flight, flying outdoor Motor(X4): 0820 Coreless Frequency: 2.4GHz + 5.8GHz (Video transmission) Transmitter: 2.4GHz 4 channels vs 4.3 Inch LCD Control distance: 50 – 100meters Live video distance: around 100 meters Battery: 3.7V Voltage, 380mAh li-po battery with auto cut off safety PCB Charging time: about 30 minutes Flight time: around 7 minutes USB charging cable

List Price: $ 249.99

Price: [wpramaprice asin=”B00GSNWB5K”]

[wpramareviews asin=”B00GSNWB5K”]

  1. FuntimeGrandpa "FuntimeGrandpa" August 21, 2014 at 10:27 am
    686 of 714 people found the following review helpful
    5.0 out of 5 stars
    Hubsan FPV 5.8ghz X4 H107D Micro, February 1, 2014

    Customer Video Review Length:: 3:40 Mins

    I have been enjoying the Micro’s from Hubsan and think they are great for practicing in confined areas. I have larger models and have been waiting for my IRIS from 3Drobotics. But as I wait I can tell you practicing with the 6 axis micros does help to improve your understanding and use of the controls. Hubsan from my experience has made some really great products and put so much thought into the development of these micros. They fly great, take a lot of abuse and have parts available should something break.

    I have become so interested in the multi-rotor and never thought they could be this much fun. I started out looking for a project or hobby that I could enjoy with my Grandchildren and this one sure hit the mark. If you are a parent or grandparent and want something that everyone can enjoy the multi-rotor copter I believe will work. Any of the micros from Hubsan would be great to start. The X4 model H107L is the lowest cost, or the H107C which now has a HD 720p camera built in or the one here the H107D with the FPV screen built into the controller.

    I even put on my more advanced FPV goggles and was able to connect to the H107D which was really fun watching from the copters point of view.

    I put up some videos for anyone that wants to see it flying or me talking about what I feel is important. You can check all my videos at Funtimegrandpa […] or […] and if these links are removed you can go to plus dot google dot com and search for Funtimegrandpa and then click on Grandpa Jake […]

    I hope everyone has a wonderful day and please stop in to my site when you have time. Take Care Grandpa Jake


    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes

  2. 320 of 334 people found the following review helpful
    3.0 out of 5 stars
    Initial impressions – live, December 20, 2013
    Bob T. (Alexandria, Virginia) –

    Verified Purchase(What’s this?)

    I got mine today, and have gone through two battery charging cycles. I’m writing this initial review about my initial experiences while I’m waiting for the battery to charge for my third flight series.

    Contrary to other reviews, I didn’t have any trouble removing and inserting the battery. It’s a tight fit, but manageable if you’re careful.

    I was dismayed at how fast the control unit batteries are depleted. I’ve only flown it on two drone battery charges, and already I have to replace the batteries in the control unit. I guess the video takes a lot of power! There are two jacks on the left-hand side of the control unit which don’t seem to be explained in the Instruction Manual. It would be nice if one of them was for power. I’ll find out.

    Mode 2 controls (the default) seem natural for this device. Mode 1 must be for model airplanes or something.

    I highly recommend installing the rotor shield because I’ve crashed it a dozen times on my first two flight sequences. Like other reviews, I agree that there is a problem with the propellers coming off, even with the rotor shield on. It’s just annoying if you like to crash a lot.

    I was surprised at the great video resolution. However, I’m not sure it is adequate to fly this unit totally by FPV (First Person Video) because of the relatively narrow view angle.

    I’ve seen a half-dozen larger quad drones fly. They are about 2 feet square and cost a lot more. I wouldn’t recommend flying them indoors unless you don’t have anything breakable in your house. This little unit which is about 4 inches square is just fine for indoors. It’s fun for now, but eventually, I might use it outdoors to inspect the gutters on my house for leaves without having to climb a 40-foot ladder. Of course, if there is an obstruction I’ll still have to go up there on the ladder to clear it out.

    After my second session with the unit, I can hover it within a few feet. It takes a little practice dealing with the normal air currents in a house. I can’t wait for my third session when the battery is recharged. More to come:

    Just finished my third session. Only crashed twice. I’m dismayed that the transmitter batteries are down to 3 out of 5 bars. I’ve already replaced them once. Otherwise, I’m having a great time flying this toy. Will post more after I’ve had more experience with the unit.

    I’ve been playing with this thing for hours since I got it. It’s really a lot of fun. However, I want to warn you that those little high-speed propellers are sharp and potentially dangerous. Even with the propeller shield on, I received two bleeding cuts on my arm when it hit me. It could have been worse. I highly recommend wearing eye protection of some sort when flying this thing. That applies to any people or pets in the vicinity also. This “toy” could easily blind someone.

    And FYI, I’m on my third set of 4 AA batteries now. I think rechargeable batteries would be smarter.

    I just got three sets of AA rechargeable batteries for the Transmitter, and maybe I can afford to fly this thing now.

    I was surprised that one of my LEDs has gone out already. Replacing an LED is not a simple thing. You have to take the unit apart and re-solder a new LED to it. If you don’t have a soldering pencil or know how to do small delicate soldering, it could be problematic.

    Sometimes my Transmitter won’t establish control contact with the X4 until I connect and reconnect the X4 battery. I haven’t had any such problem with the video connection.

    I replaced the bad LED. It is not nearly as easy as the Instruction Manual would have you believe. First you have to “dislocate” the bottom cover at each of the four arms. Next you must use a very small phillips head screw driver to remove the two small screws which hold the bottom on. Those small screws are very easy to get away from you and have a tendency to cuddle up to the motors (which are magnetic) where they are hard to see. When you remove the bottom cover, do it very carefully because there is a short cable between it and the main circuit board. (I was able to displace the bottom cover enough to access the LED solder joint on the circuit board without removing that cable.) Unless you are experienced at soldering small wires onto small circuit boards, I don’t recommend trying it, lest you destroy the circuit board. I suggest having a jeweler do it for you. I hope I don’t have to do that again.

    This drone is not easy to fly. It seems unstable in all directions and you have to get very familiar with the controls to make it do what you want. Your responses have to be reflexive, not thought out, because by the time you notice a flight deviation and figure out which control to use in what direction, it will be too late. Chances are you will over-correct and smash the thing harder than…

    Read more

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes

Enable registration in settings - general